| DRIVE-FIX
wall tie replacement and masonry repair system can be used to re-tie and
repair a wide range of differing materials like air-crete blocks, clay bricks,
stone, concrete blocks and timber studs. |
|
| |
| Installation
Procedures: |
|
| Adding
Wall Ties |
| 1.)
Drill pilot hole through outer leaf and then continue pilot hole if required
until recommended depth in inner leaf is reached. |
|
| |
| 2.)
Insert tie into DRIVE-FIX tool, then position front of tie into pilot hole
and Drive home. |
|
|
| Masonry
Crack Repair |
| |
| 1.)
Drill pilot hole through masonry until recommended depth is reached. |
|
| |
| 2.)
Insert tie into DRIVE-FIX tool, then position front of tie into pilot hole
and Drive home. |
|
|
| |
REMEDIAL
WALL TIE AND MASONRY CRACK REPAIR SYSTEM WITH STRESS FREE HELICAL PINNED
FIXINGS.
|
| |
| Benefits: |
- Quick
installation just drill and drive
- Low labour
costs
- High
tensile strength
- Allows
for thermal movement
- Multi-water
drips
- Easily
installed through cavity insulation
- Designed
and tested to DD140
- Insurance
backed guarantees
|
| |
| Features: |
- Easy
and problem free installation
- Austenitic
304 and 316 Stainless Steel
- Effective
in tying cavity and solid walls
- No
mechanical expansion problems
- No
resin, no rubber, high fire rating
|
| |
|
| |
Material |
Tie
Size |
Tie
Density |
Fixing |
Air-crete
blocks |
8mm |
2.5m2 |
Class
4 |
Timber
studs |
8mm |
4.44m2 |
Class
5 & 6 |
Soft
clay bricks |
8mm |
2.5m2 |
Class
3 |
Concrete
blocks |
8mm |
2.5m2 |
Class
2 |
Hard
clay bricks |
8mm |
2.5m2 |
Class
2 |
Engineering
bricks |
8mm |
2.5m2 |
Class
2 |
|
| |
