| The
RESIN FIX cavity wall tie replacement system, when a resin bond is required
in both inner and outer leafs of differing materials like, air-crete blocks,
clay bricks, stone, and concrete blocks, ideal for small one off jobs of
about 30 to 200 ties. |
|
| Installation
Procedures: |
| |
| 1.)
Drill clearance hole through outer leaf and 70mm into inner leaf. |
|
| |
| 2.)
Clear both holes of any dust or debris. |
|
| |
| 3.)
Fill inner hole with RESIN. |
|
| |
| 4.)
Insert RESIN FIX TIE. |
|
| |
| 5.)
Load test RESIN FIX TIE. |
|
| |
| 6.)
Fill clearance hole with RESIN to bond tie to outer leaf. |
|
| |
|
| REMEDIAL
WALL TIE SYSTEM WITH A RESIN FIXING IN THE INNER LEAF AND A RESIN FIXING
ON THE OUTER LEAF. |
| |
|
RESIN FIX TIES are manufactured out of 304 or 316 Stainless Steel and have
been independently testing using a common range of building materials by
the University of Portsmouth material testing department in accordance with
BS 1243 and DD140. They can be installed quickly and easily by drilling
a clearance hole through the outer leaf then 70mm into the inner leaf. After
cleaning out the holes with an air pump, fill the inner hole with resin
and then insert RESIN FIX TIE and then fill outer hole with resin. The constant
helix of RESIN FIX TIES gives multi water drips, stopping water transfer
across cavities. The low cross sectional area of RESIN FIX TIES gives good
sound proofing qualities and allows lateral flexibility to overcome any
misalignment or seasonal thermal movement while still maintaining the required
resistance to wind-loads. |
| |
| Tie
Classification DD140 |
| |
Material |
Tie
Size |
Tie
Density |
Fixing |
Air-crete
blocks |
6mm |
2.5m2 |
Class
3 |
Soft
clay bricks |
6mm |
2.5m2 |
Class
2 |
Concrete
blocks |
6mm |
2.5m2 |
Class
2 |
Hard
clay bricks |
6mm |
2.5m2 |
Class
2 |
Engineering
bricks |
6mm |
2.5m2 |
Class
2 |
|
| |
