 |
 |
 |
 |
 |
|
You
are here - Structural
Repair > Wall Ties >
Types of Wall Ties > Resin
Mechanical Wall Tie - Technical Data Sheet 2 |
Resin Mechanical Wall Tie
TECHNICAL DATA SHEET 2
|
|
|
|
|
|
|
You
are here - Structural
Repair > Wall Ties >
Types of Wall Ties > Resin
Mechanical Wall Tie - Technical Data Sheet 2 |
Resin Mechanical Wall Tie
TECHNICAL DATA SHEET 2
|
DESCRIPTION |
These ties are used in situations where the inner leaf construction is of low compressive strength ie normally below 7N/mm2 and the outer leaf is constructed from a higher compressive strength material ie nomally 10N/mm2. |
The inner
'wavy tail' end has been in use for over 20 years and is acknowledged
as an extremely effective resin anchor design. |
Wavy Tail - Neoprene |
The Neoprene sleeves avoid point loading, a characteristic of metallic expanders and are tolerant to hole and masonry variations. The sleeves are manufactured to BS 2752/c70 Ref C698. |
|
| Wavy Tail - Stainless Steel / Brass |
| The Stainless Steel and Brass expanders are designed to provide a wide range of fixings into soft and hard materials alike without undue relaxation or creep under continuous tensile and compressive loading or cyclical vibration. |
 |
